Short Answer
Add up the width of every wall, multiply by the ceiling height, and subtract about 20 square feet per door and 15 per window. Multiply by the number of coats (usually two), then divide by the coverage on the can, which is usually around 350 to 400 square feet per gallon. For a typical 12 x 12 bedroom with 8-foot ceilings, that works out to about 2 gallons for the walls.
This box contains affiliate links. As an Amazon Associate I earn from qualifying purchases. See the affiliate note at the bottom of this post.
🛒 Helpful Picks
These are well-reviewed options, not my personal picks. They make measuring and buying the right amount easier.
Step 1: Measure the Walls
You don’t need anything fancy. A tape measure and a scrap of paper will do.
- Measure the width of each wall and add them together. For a rectangular room, that’s just the distance around the room (the perimeter).
- Multiply by the ceiling height. Measure it; don’t assume 8 feet. Some older homes have taller ceilings, and a 9-foot ceiling adds more than 10% to the wall area.
- Subtract doors and windows. A standard interior door is about 3 x 7 feet, so take off about 20 square feet per door. An average window is closer to 15. Big picture windows, patio doors and closet openings, measure them.
That number is your wall area in square feet. Sherwin-Williams lays out the same method in their how much paint to buy guide.
Step 2: Check the Coverage on the Can
Every paint lists a coverage rate (sometimes called the spread rate) on the label or the product’s data sheet. Most interior wall paints land somewhere around 350 to 400 square feet per gallon on a smooth, previously painted wall. Some premium lines claim more. For example, Benjamin Moore lists its Regal Select at 400 to 450 square feet per gallon on its technical data sheet, and notes that the real number depends on the surface texture and how porous it is.
That last part matters. The label number is a best case. I’d plan on the low end of the range, especially on older plaster, textured walls, or anything that hasn’t been painted in a long time.
Step 3: Do the Math (Coats Included)
Gallons = (wall area x number of coats) ÷ coverage per gallon
Here’s a real example: a 12 x 12 bedroom with 8-foot ceilings, one door and two windows.
- Perimeter: 12 + 12 + 12 + 12 = 48 feet
- Wall area: 48 x 8 = 384 square feet
- Minus one door (20) and two windows (30): 334 square feet
- Two coats: 334 x 2 = 668 square feet
- At 350 square feet per gallon: 668 ÷ 350 = about 1.9 gallons
So you’d buy 2 gallons. If the math lands right on the edge, round up. Running out halfway through the last wall is a lot more annoying than having a little left over for touch-ups.
How Many Coats Should You Plan For?
Plan on two coats for walls. One coat almost never looks even, even with paint-and-primer products. You’ll need more than that, or a primer coat first, if:
- You’re going from dark to light (or bright to pale). Plan a primer coat plus two finish coats. More on that in how to paint over dark colors.
- The drywall is new or patched. Bare drywall and joint compound soak up paint. Prime first. See can I paint over unfinished drywall?
- It’s a deep, saturated color like a strong red or navy. These often need an extra coat to look even.
- The paint is cheap. Thin paint covers less per coat, so you end up buying more of it anyway. Here’s my take on whether premium paint is worth it.
Primer has its own coverage rate on its own label, and it’s often lower than the finish paint. Do the same math separately with the primer’s number.
Ceilings, Trim and Doors
Ceilings
Ceiling area is just length x width. That same 12 x 12 bedroom has a 144-square-foot ceiling. Two coats is 288 square feet, so one gallon of ceiling paint covers it. If you’re doing the ceiling too, here’s how to paint a ceiling without streaks.
Trim
Trim is a small area, so it’s easy to overbuy. Baseboard that’s about 4 inches tall around a 48-foot room is only about 16 square feet. Add door and window casing and you’re still usually under 50 square feet. A quart of trim enamel covers roughly a quarter of what a gallon does, so one quart is usually plenty for one room’s trim, two coats. See how to paint trim and baseboards for the how-to.
Doors
Doors use more paint than people expect. A 3 x 7 door is about 21 square feet per side, so both sides with two coats is around 84 square feet before you count the edges. If you’re painting several doors, buy a gallon of trim enamel instead of a pile of quarts. More in how to paint interior doors.
Things That Make You Use More Paint
- Texture. Textured walls, rough plaster and block have more surface area than a flat wall. Knock 10 to 20% off the coverage number to be safe.
- The wrong roller. A thick nap holds more paint and lays it on heavier. Match the nap to the wall. Here’s how to pick the right roller cover.
- Thirsty surfaces. Fresh patches, raw wood and walls that haven’t been painted in decades soak it up.
- Spraying. A sprayer is fast, but some of the paint ends up in the air instead of on the wall.
Buying and Mixing Tips
- Buy it all at once. Tinted paint from two different batches can be a hair off. If you need more than one gallon of the same color, buy them together.
- Mix the gallons together. Pour them into a 5-gallon bucket and stir (painters call this “boxing” the paint). That way every wall is the exact same color.
- Compare quart and gallon prices on the shelf. Quarts cost more per square foot, so if you’d need two or more, a gallon is usually the better deal.
- Keep the color info. Save the receipt or snap a photo of the sticker on the lid so you can get an exact match later.
What to Do With Leftovers
Keep a little for touch-ups. Pour it into a clean quart can, hammer the lid down tight, and write the room and the date on the lid. Store it inside, not in an unheated garage or shed. Latex paint shouldn’t freeze, and a Northeast Ohio winter will do it.
Time and Difficulty
- Time: 10 to 15 minutes to measure a room and do the math.
- Difficulty: Easy. If you can use a tape measure and a phone calculator, you can do this.
- Tools: Tape measure (or a laser measure), pencil and paper, and the label of the paint you’re buying.
Common Mistakes
- Forgetting to multiply by the number of coats.
- Assuming 8-foot ceilings without measuring.
- Using the best-case coverage number on rough or patched walls.
- Buying one gallon now and “more later” in the same color.
- Using wall paint math for the ceiling and trim instead of figuring them separately.
DIY or Call a Guy?
DIY it. Figuring out how much paint you need is a ten-minute job anyone can do, and it saves you a second trip to the store.
Call someone if you’d rather not do the painting itself, the room has tall walls or a stairwell, or you’re dealing with a big color change and want it to look right the first time. If you’re on the fence, here’s how I’d think about whether to DIY or hire a painter, and how long it takes to paint a room yourself. Painting a whole room? Here’s what order to paint it in.
Local to Euclid or Cleveland’s east side? I paint rooms myself, and when I do, figuring out and picking up the right amount of paint is part of the job. See my Painting Services in Euclid & Cleveland page, or text me a photo at 216-800-5883.
FAQ
How much paint do I need for a 12 x 12 room?
With 8-foot ceilings, one door and two windows, about 2 gallons for two coats on the walls, plus about 1 gallon if you’re also painting the ceiling.
How many square feet does a gallon of paint cover?
Most interior paints list around 350 to 400 square feet per gallon on a smooth wall. Check your can’s label, and plan on the low end for textured or patched walls.
Do I really need two coats?
Almost always. One coat tends to look patchy, especially over a different color. Two coats give you even color and a finish that holds up.
Is it better to buy too much or too little?
A little too much. Leftover paint is handy for touch-ups, and running short can leave you with a slightly different batch on the last wall.
How much paint do I need for an accent wall?
Measure that one wall’s width x height. A single 12 x 8 wall is 96 square feet, so two coats is about 190 square feet. A quart covers roughly 100 square feet, so it won’t stretch to two coats. Buy a gallon unless the wall is small.

Scan to join our Loyalty Program, get a free coupon for your next service, and stay up to date on our services and articles.
Affiliate Note
Some of the links in this article are affiliate links. That simply means if you choose to buy through them, I may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. I only recommend products I trust and would feel comfortable installing in my own home or a client’s home.
If you try something I recommended and it turns out to be anything less than a five-star experience, please let me know. I always want these recommendations to be genuinely helpful.
