FREE TOOL FROM COLIN CAN HELP
Enter your room size to see how many sheets of drywall to buy, plus the joint compound, tape and screws to finish them.
✓ Free, no sign-up✓ Sheets, mud, tape and screws✓ Walls with or without the ceiling
Drywall you need
–
Just a few holes to patch? Colin Can Help repairs drywall and paints in Euclid, Cleveland’s east side and Lake County.
Send a text to Colin about drywall repair216-800-5883 · see painting & wall repairEstimate only. Sheets include 10% for cuts and waste. Doors are figured at 3×7 ft and windows at 3×5 ft. Compound uses USG’s figure of about 10 gallons per 1,000 sq ft for a full taping job, tape about 370 ft per 1,000 sq ft, and screws about 1 per square foot.
You only need a tape measure and two minutes.
Measure the room’s length and width along the floor, then the wall height from floor to ceiling.
Just count them. The calculator subtracts a standard door (3×7 ft) and window (3×5 ft) for you.
Closets, bump-outs and stairwells can go in as extra square feet.
A 4×8 sheet covers 32 sq ft. The calculator adds 10% for cuts and waste, and figures about 10 gallons of joint compound per 1,000 sq ft, based on USG’s numbers.
Knowing how much to buy is step one. These guides cover the rest, in order.
About 12 sheets of 4×8 for the walls of a 12×12 room with 8 ft ceilings, one door and one window, including 10% extra. Add about 5 more sheets if you’re doing the ceiling too.
Plan on about 10 gallons per 1,000 sq ft for a full three-coat taping job. A 4.5-gallon bucket of premixed mud finishes roughly 450 sq ft.
It depends on the coat and how fast you need it to set. See What Type of Joint Compound Do I Need? for the differences.
Longer sheets mean fewer seams to tape, but they’re heavy and take two people. For a small room or a DIY job, 4×8 sheets are easier to handle.
I repair drywall and paint in Euclid, Cleveland's east side and Lake County. Text me a photo of the damage and I'll get you a price.