FREE TOOL FROM COLIN CAN HELP

Deck Stain Calculator: How Much Stain Do I Need?

Enter your deck or fence size and pick your stain to see how many gallons to buy for one or two coats.

✓ Free, no sign-up✓ Decks, stairs, railings and fences✓ Based on published spread rates

Colin Can Help logo

Deck & Fence Stain Calculator

How many gallons of stain your deck or fence needs.

Deck floor (add a row for each level)
Stair steps0≈ 6 sq ft each
Type of stain
Coats
Wood is
First coat: 250 sq ft per gallon

Based on Behr’s published spread rates, at the low end so you don’t run short. Second coats go about twice as far. If your can lists a different first-coat number, enter it here.

sq ft / gal
Your color

Stain you need

0

–

Area to stain–
First coat–
Second coat–
Best case–

Rather not spend the weekend staining? Colin Can Help paints and stains in Euclid, Cleveland’s east side and Lake County.

Send a text to Colin for a staining price216-800-5883 · see painting services

Estimate only, with about 10% extra. Coverage follows Behr’s published spread rates (semi-transparent 250–300, solid 200–400, transparent 300–350, penetrating oil 350–400 sq ft per gallon on the first coat; second coats go about twice as far) and varies by product and wood. Stairs count as about 6 sq ft per step, railings about 6 sq ft per foot (3 ft tall, both sides), and fences add 10% for posts and rails.

How to Measure for Stain

A tape measure and a couple of minutes is all it takes.

📏 Deck floor

Measure the length and width of each level. Add your stairs as a step count and your railings in linear feet.

🚧 Fences

Measure the length of the run and the height. Pick Both sides if you’re staining both faces.

🪵 Wood condition

Weathered, rough or thirsty wood soaks up more stain. Pick Weathered and the calculator plans on about 20% less coverage.

Behr lists its semi-transparent stain at about 250–300 sq ft per gallon on the first coat and about twice that on the second. Coverage varies by product, so check your can.

Deck Stain Calculator FAQ

How much does a gallon of deck stain cover?

It depends on the product and the wood. Behr lists its semi-transparent stain at about 250–300 sq ft per gallon for the first coat and its solid color stain at 200–400. Second coats go about twice as far.

Do I need two coats?

Most semi-transparent and solid stains are made to go on as two thin coats. Penetrating oils usually go on as one. Follow the label on your can.

Do stairs and railings use a lot of stain?

More than you’d think, because of all the edges and spindles. The calculator counts about 6 sq ft per step and 6 sq ft per foot of railing.

Should I buy gallons or a 5-gallon bucket?

If the calculator says 4 gallons or more of one color, compare the price of a 5-gallon bucket. It’s often cheaper, and the color stays the same from start to finish.

Rather Not Spend the Weekend Staining?

I stain decks and take care of fences in Euclid, Cleveland's east side and Lake County. Text me a photo and I'll get you a price.

📱 Text Colin a Photo: 216-800-5883

See outdoor services →  ·  More free tools →

Colin Can Help LLC, 2026 © All Rights Reserved